Farmall Tractors Discussion Board |
Re: Jump starting a 6V + grd. with 12V - grd.
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by 100Glenn on January 23, 2000 at 10:45:41 from (63.14.187.65):
In Reply to: Jump starting a 6V + grd. with 12V - grd. posted by Jim Gurney on January 22, 2000 at 18:46:00:
Clamping positive to negative will surely burn something out really fast! Generally, cross-jumping isn't a good idea, and the post about using a 6/12v battery charger with jump-start capabilities is a great idea. Having a fresh 6v is good, too. I cross-jumped a 6v with a 12v a few weeks ago. I used a 2810 Ford diesel tractor. I removed the 6v battery outright. I clamped negative from the Ford battery to the starter switch on the Farmall and positive from the Ford battery to the fender of the Farmall. I hit the starter rod and she fired right up. I disconnected the positive cable and it died; thus, I knew the electricals weren't charging. I only let it run this way for a couple of minutes. I'd use this method only when absolutely necessary.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|