Farmall & IHC Tractors Discussion Board |
Re: ethanol
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RustyFarmall on July 31, 2006 at 17:50:42 from (199.120.81.249):
In Reply to: ethanol posted by dig on July 31, 2006 at 17:17:24:
Try the e-85 without making any modifications to the carb. If it starts to sputter or miss under a load, turn the carb load adjustment out to a total of no more than 5 turns. If that doesn't get it, then you will need to remove the main metering tube and start drilling out those tiny little holes in the tube. Drill the bottom holes first, no more than one drill size bigger than the hole is now, if needed, do the same to the second set of holes, and maybe the third set. You might need to drill them two sizes bigger. Let me clarify by saying that I have never used e-85, but the metering tube is the only thing in the carb that can be easily modified to allow more fuel. There are other things that can be done, but start with this. E-85 is not yet available where I live, when it is, I will experiment also.
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|