Farmall & IHC Tractors Discussion Board |
Re: Dent in Gas Tank
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by River Bottom Farmer on June 09, 2006 at 18:47:50 from (152.163.100.65):
In Reply to: Re: Dent in Gas Tank posted by Doug Fisk on June 09, 2006 at 17:19:40:
I had a 3 inch circular dent in my gas tank on the 39 H that I am just finishing the restoration on.I took some half inch cold rolled rod and weld it to an old body dolly and bent the rod so it would fit through the fill hole and slowly pounded the dent into submission.Worked around the outside of the dent in a circular motion working my way to the center of the dent.Smoothed down with a file to get the contour right,and finished with some lightweight body filler.Just a skim and sanded down primered and wet sanded.Turn out perfect.It helps to have the coffee pot running and your favorite station on the radio......You will get it,just takes patience but it will happen.......RBF
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|