Farmall & IHC Tractors Discussion Board |
Re: overhaulin a fast hitch questions
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by CNKS on March 02, 2006 at 20:14:39 from (204.249.178.138):
In Reply to: overhaulin a fast hitch questions posted by J Muehring on March 02, 2006 at 19:31:47:
Likely all the bushings are worn -- they can be replaced, for a price. Machine shop did the ones in my 460 High Utility (same rear end as yours) fasthitch for $425. You can probably find a used fasthitch for that price, but it will be worn too. Must be only one source for the bushings. This machinist was very busy working on high dollar jobs, and had difficulty getting the bushings and working my job in. Took a long time. I suppose they can be made locally if you can find someone to do it. You are not going to get fast hitch to work like a drawbar. That is a problem with the unit as the hitch pulls from under the tractor at the same point that the swinging drawbar attaches to, if so equipped. It inherently has slop in it.
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|