Farmall & IHC Tractors Discussion Board |
Re: Super C loader questions
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Nat 2 on February 16, 2006 at 05:02:59 from (64.80.108.53):
In Reply to: Re: Super C loader questions posted by shawn138 on February 15, 2006 at 14:08:53:
All that the one-way loader lift changes is that you'll only need to run one line instead of two. You'll have gravity-down, not power-down is all. Now as I understood your previous reply, you had some rig that replaced the "hard" lines running from the hydraulic pump to the touch control... Now it seems like you do not have that? So, how are you getting pressure from the hydraulic pump? Do you have a bypass block bolted in between the hard lines and the Touch Control? My process stays basically the same, only the points for the connections will be different. The goal here is to run pressure from the pump, through the control valves, through the Touch Control, back to the external reservoir, and into the suction side of the pump. The challenge is in WHERE to make these connections. Unfortunately, this is something I'd have to see in person to decipher, unless you can post some pictures...
Replies:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|