Farmall & IHC Tractors Discussion Board |
Re: 584 Grill
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by DADDY E on February 11, 2006 at 20:40:37 from (69.158.39.108):
In Reply to: 584 Grill posted by Stubober on February 11, 2006 at 15:12:25:
I HAVE A 574 (ITHINK THE GRILLS ARE THE SAME). MY GRILL WAS BROKEN BUT I HAD ALL THE PIECES. I REMOVED THE GRILL FROM TRACTOR TURNED IT OVER AND USING METAL STRIPS (I USED AN OLD HALF INCH BAND SAW BLADE). STAND THE METAL STRIPS ON THEIR EDGE AND USING A HOT HELT GLUE GUN,LAY A LAYER OF HOT MELT THE LENGTH OF THE CAVITY IN BACK OF GRILL AND INSERT THE METAL STRIP AND LET IT COOL. DO THE SAME FOR ALL AREAS NEEDING REPAIRED. THEN REPEAT THE GLUE LAYERS LETTING IT COOL BETWEEN PASSES UNTIL THE CAVITY IS FULL AND THE METAL STRIP IS ENCASED IN THE HOT MELT. MAKES IT VERY STRONG. I DID MINE 15 YEARS AGO AND IT"S STILL A-1, AND NO THE HOT MELT WON"T MELT ON A HOT DAY..........ELDON FROM ONT.
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|