Farmall Tractors Discussion Board |
Re: 140 Power Steering?
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Stanley R. Hudson on January 03, 2000 at 21:09:47 from (205.245.121.129):
In Reply to: 140 Power Steering? posted by Steve K on December 29, 1999 at 06:53:36:
I make the brackets to put power steering on super A 100's ,140's and the (CUB) I use a charlyn inline powersteering unit, you would have to cut 11 inches out of your steerinf shaft the unit attaches to the top of the hyd. lift housing . and I use the orginal hyd pump for the supply, you would have to cut the pressure line into and install 2 hyd. fittings. I've grat success, the only problem that I have found , is that you cannot work the hyd. lift and the steering at the same time. you can easily get use to that. you can steer it with one finger. I've currently have converted 6 farmalls with no problems , It cos is kind of high but weigh the difference in convience. complete unit is 600.00 dollars. If I can be of any help or can answer any question's please Email or call 252-975-2207 from 5pm to 10pm est.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|