Farmall & IHC Tractors Discussion Board |
Re: Magnum project- pictures
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by P Backus on December 30, 2005 at 22:23:03 from (69.128.32.197):
In Reply to: Re: Magnum project- pictures posted by JakeF on December 30, 2005 at 19:44:26:
Hi Jake I didn"t see a reason to take the thermostat housing off, so it"s still on there. However, I did break one of the bolts that holds one of the heat shields on, and one of the radiator support bracket bolts. I wimped out and left the exhaust manifold on so the machine shop can mess with it. Must be that durn metric hardware! I"m not so worried about the gear lash in the oil pump idler, but the radial play in the bushing. I"m just guessing, but I bet there"s .060 of slop in the bushing. The pump shaft seems fine. By the way, what"s a good way to get the old sleeve off of the crankshaft, and where do I get the tool for installing the new one? I"ll talk to my CIH dealer to see if they"ll lend it to me. I spend thousands there every year on parts, so they might help me out. I"m kind of planning on taking that cam out on Saturday, so I"ll be looking around for a piece of PVC or something suitable. I really do appreciate being able to talk to someone who"s been in there before. I"m pretty mechanically saavy, but if I worry too much about something I"ve not done before, I can get hamstrung. Paul
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|