Farmall & IHC Tractors Discussion Board |
Re: H Starter short circuit
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Rock2k on December 15, 2005 at 09:49:38 from (67.99.189.2):
In Reply to: Re: H Starter short circuit posted by captaink on December 15, 2005 at 06:30:07:
Excellent! Good stuff. I explained part of it wrong (I knew I would). The 'arm' I was talking about is the thick metal 'lead' from the windings to the external post. The longer one is all scorched, and I was thinking it was either making contact with the housing, or with the end of the commutator. Unfortunately you can't really tell when it's apart, and there's no way to get to it when it's assembled. It looks like the solder from the 'lead' is long gone if it was on there (it's the large screwdriver type post). I'm surprised this isn't more of an issue, as it seems like the routing of the lead is pretty error prone, and it doesn't seem as those there is alot of room for error/movement. I'll check the brush arms though also, as that's a good idea. Maybe they were touching the copper. Thanks
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|