Farmall & IHC Tractors Discussion Board |
Re: hydro pump mystery
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on November 25, 2005 at 14:56:29 from (209.226.106.178):
In Reply to: Re: hydro pump mystery posted by fenton on November 25, 2005 at 11:47:29:
fenton: I have been watching this discussion and somehow it seems to be going nowhere. Someone is not communicating very well. Did you by chance split this pump leaving the front cover with the engine block. Have you gotten to the driving gear on pump shaft, driven by the timing gears. By the looks of that shaft in my IT manual, it looks like a taper on shaft where gear fits to it. It has a key, suggesting to me the gear is held on by threaded end of shaft using a nut. Forget those pumping gears for the time being. The gear you must concern yourself with is the gear driven by the timing gears. The one with the spiral teeth. That gear must be removed from shaft to get to the seal. The only place that pump can leak internally into the crankcase is along that shaft that protrudes into the timing gear chamber. My diagram shows a seal on the external side of the front half of the pump housing. Two days ago when I said I never had one of these pumps apart, that is precisely what I meant. That didn't mean I've never had a hydraulic pump apart. They all have one thing in common, that being a driving shaft, and along that driving shaft is the only way hydraulic oil can leak into the crankcase, in this application. In all your communication you speak of gears, but you never identify whether they are oil pumping gears or driving gears. Until you do that no one can help you. By the way the pump in my IT manual is a Pesco pump. It states some tractors are equiped with a Thompson pump.
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|