Farmall & IHC Tractors Discussion Board |
Re: 1206 Farmall
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by the tractor vet on November 11, 2005 at 16:29:57 from (4.124.71.182):
In Reply to: 1206 Farmall posted by JTB on November 10, 2005 at 18:03:28:
Not a big deal on them brakes like ACe said it could be just the bull pinion seal or it could be the piston seal . anyway ya got to get in there and look and see NOW THE one thing that they did not tell ya is that ya need to reset the self adjuster after ya fix eveything and make sure that the return springs are free More then likely you will find the isolator plate has broken off the piston don't panic clean it up if it is in one pice with brake kleen and use some good apoxie and gule it back on if ya are going to replace the two large O/RING on the piston then clean up the surfaces with 180 emery and i use white grease for assambly then after it is all back together ya have to bleed the brake the bleeder is on top start the tractor open the bleeder and push the brake pedal down till ya got a stream and close while holding the pedal down .all done good to go .
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|