Farmall & IHC Tractors Discussion Board |
Re: I'm a glutten for punishment
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Don L C on October 23, 2005 at 20:31:05 from (69.133.44.143):
In Reply to: I'm a glutten for punishment posted by Randy-Ia on October 23, 2005 at 14:50:50:
Randy--- Shift pattern is from left side setting on the seat --- up-reverse down-1st mid-way to right up-2nd. down 3rd. all-way right up 4th. down 5th. If you can, let the seller load it.......My "M" with both wheels all the way in is 88 inhttp://www.ytmag.com/farmall/messages/516222.htmlches outside to outside It weighs just under 5000# with rear wheel weights no water in the tires... Befor trying to load it--- drive it around trying out the shift pattern and the brakes.. I have been told the steering problem is a gear in the steering box..only 1/2 of this gear is used...so turn it around 90*,now it will be runnig in the unused part of the old gear (fixed) Check this out I have never done it...
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|