Re: 706 WOES

Posted by Old Dutch on June 06, 2005 at 15:53:03 from (68.118.158.187):

In Reply to: 706 WOES posted by borde on June 06, 2005 at 05:05:54:

Borde, They can be tough to deal with. Take some patience, and soak them good with penetrating oil. Or better yet, if you can back it into a low spot where the lower hitch arms and anchor pins are submerged under water over night, or even a little longer. You will be amazed at what it does. Take the grease zerks out, and get a couple grade eight 3/8" fine thread bolts, with enough length to put a heavy flat washer on.They should thread into the grease zerk openings, make sure to get them in good and tight. Now with a slam puller to clamp on to the bolt and washer and a few good jerks they will come out I assure you. Done it many times. Been their done that. For some reason water does things with rust. Works as a lube. Taking the lower link sensing arms out is a problem you don't want to deal with believe me.
Dutch

Follow Ups:

• Re: 706 WOES 1borde 09:48:12 06/08/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]