Farmall & IHC Tractors Discussion Board |
Re: M transmission drive coupling---how lose is ok
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Randy SE-MN on March 22, 2005 at 05:37:23 from (206.9.216.46):
In Reply to: M transmission drive coupling---how lose is ok? posted by zooeyhall on March 21, 2005 at 17:10:03:
I had the same problem on my M. The taper bolts were worn and grooved real bad and the coupler flange holes were elongated. I filled the grooves in the bolts with braze, and hand filed them down. I have a good relationship with some yards, and one of them "hand selected" a real good flange they had on the shelf. I heard the flange itself was expensive so I trook a chance, and came out ok. I then got new rubber bushings and related hardware and it all went together real well. Good luck on your machine...Randy
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|