Farmall & IHC Tractors Discussion Board |
Re: 3 point for IH 300 utility
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by gascolator on February 24, 2005 at 12:49:25 from (151.197.212.40):
In Reply to: 3 point for IH 300 utility posted by Amishbob on February 22, 2005 at 16:33:12:
Do you have a 2-point fast-hitch? If so, depending on what you want to do, all you need to do is to buy the adaptor prongs and a top link. IHC actually intended for it to adaptable this way, so there is a place to put the top link on the rockshaft. We use ours with a 6' King Cutter rotary and a 7-foot King Cutter blade for snow plowing, and it works fine. You have to figure out the nuances of locking down-force in and out and controlling whether it can sway or not (just where you put pins) but it really is just fine. Oh...the fast hitch ain't so fast this way, and it takes some practice to get the prongs on the implement, back up to just the right spot, set them into the receivers, and then back down to lock them.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|