Farmall & IHC Tractors Discussion Board |
Re: 4166 steering
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by redfarmer on February 13, 2005 at 13:26:30 from (207.69.136.201):
In Reply to: Re: 4166 steering posted by P Backus on February 12, 2005 at 19:39:29:
Thanks for your input and yes I do have a service manual from IH.As for why the steering rod bent maybe this might help explain it.One guy responded on the internet that after the lack of pressure the next thing he would suspect was the rear steering cylinder.The other day I talked with a dealer mechanic who remembered working on one and he said the same thing but explained it like this.If the seals in the cylinder are leaking and you are in four wheel steer,when the front wheels are turning the rear cylinder doesn't respond because of the leakage and so an extreme amount of pressure is put on the rod thus bending it at the weakest point.After learning this I have decided to also reseal both steering cylinders while I have in the shop.Thanks for your responses and hope this info might be of help to you.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|