Farmall & IHC Tractors Discussion Board |
Re: IH 606 gets stuck in gear
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by K.B.-826 on January 21, 2005 at 19:35:16 from (209.163.30.85):
In Reply to: Re: IH 606 gets stuck in gear posted by PAULIH300 on January 20, 2005 at 17:53:59:
Paul, your main clutch and TA clutch linkages are out of adjustment. When you depress the clutch pedal, the main clutch and TA clutch both disengage. As you know, whenever the the TA clutch disengages, it is possible for the TA ramp and rollers to engage. Your pedal linkage is not totally disengaging the TA clutch, just enough that the ramp and rollers grab, creating the effect of being in Direct Drive and TA at the same time. This causes the whole transmission to bind up, making it hard to get out of gear. This makes the worn shifter problem much worse. I would say that you don't need to build up the end of your shift lever yet, just go through the adjustments.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|