Farmall & IHC Tractors Discussion Board |
Re: B Farmall Exhaust Lift - do you want one?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by REDEYE on January 18, 2005 at 18:12:43 from (24.98.87.65):
In Reply to: B Farmall Exhaust Lift - do you want one? posted by RTSMikeM on January 17, 2005 at 21:58:24:
2500 is way too much for a casting. Look into rapid prototyping and in paticular SLA. Stereolithography is a pretty efficient method of making a model, and that is probabbly the most expensive part of casting as all else is just packing oiled sand around a model. A two piece SLA model is all you would need to make the impression in the mold, and if made right, you can use it to make the sand core that you would need as well. Do a search on SLA and stereolithography and just check it out. If you have a friend who can make you a 3D CAD model that will reduce your costs as well. I have to do a stereolithography modeling project for a class I am taking now and I was thinking of making a cylinder head mold.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|