Farmall & IHC Tractors Discussion Board |
Re: More crank bearings
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CNKS on January 12, 2005 at 12:09:31 from (204.249.178.138):
In Reply to: Re: More crank bearings posted by Opa A on January 12, 2005 at 11:02:24:
I've read everything, thanks. I don't disagree with any of it, just looking for explanations. The crank has standard bearings, so I doubt if it has been ground at all. The bearings look pretty well scored in places, crank does not look bad, grinding will take care of that. It and the block are going to the machine shop. Block and head hot-tanked and checked for cracks. Going to let machinist install sleeves and cam bearings, and either order or tell me what crank bearings I need. Then I will do the rest, as he doesn't do the final assembly, I don't like paying labor anyway. The camshaft needs to be replaced, according to my measurements, I will ask the machinist to verify that. Compression low on all cylinders, wet test indicates rings, two cylinders are considerably lower than the other four. All this on a supposedly good running engine. But, I'm not putting old parts back in, after going this far.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|