Farmall & IHC Tractors Discussion Board |
Re: M Live hydraulics pump choices
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T.B.W. on January 04, 2005 at 15:36:50 from (4.248.246.198):
In Reply to: M Live hydraulics pump choices posted by chris in LNK NE on January 04, 2005 at 11:27:46:
The IH live pump from a super M 400 and 450 will work. I tried to change the front cover on my 49 M, but couldn't get the front pully off. The bottom 2 bolts of the pump fit, it is the top 2 that are off a little. I took 2, 3/8 eye bolts and opened the eyes enough to put the end of the eye in the top holes and ran a bolt through the hole in front of the the oil fill. Made a bracket for the eye bolts to hook to. Painted it red and it works fine. unless you look hard, you don't see the eye bolts. I know its not the way IH intended it, but I use this tractor and needed the live hydraulics. Love the M with the live pump. When you put the pump in, there is a punch marks on the pump gear and the timing gear. line them up. make sure you have the motor on TDC before you take the distributor off and it will line up easy
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|