Farmall & IHC Tractors Discussion Board |
Re: More questions on oil pressure
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by captaink on January 04, 2005 at 12:49:35 from (66.115.214.56):
In Reply to: More questions on oil pressure posted by Randy in Pa on January 04, 2005 at 12:24:29:
Randy, To me low oil pressure is something to be concerned about, otherwise why have a gauge? Does the engine use oil, smoke, or have less power than it should? If so you are probably due for a complete engine overhaul. If low oil pressure is your only problem, I’d pull the pan and check the crankshaft bearings as you may have one or more that are “wobbled out” as Allen suggests. Check the crank for scratches, grooves, wear, out of round, etc, and the oil pump for blown gasket or warped end plate. If all looks good, a fresh set of the correct size bearings, (according to what the crank currently measures) might just be all you need. The camshaft bearings could also be worn and contribute to the low oil pressure, but to replace these you will have to split the tractor and pretty much tear the engine apart. Good Luck!
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|