Farmall & IHC Tractors Discussion Board |
update on dist. problems
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Chad from MI on December 02, 2004 at 06:35:15 from (152.72.252.244):
Guys thanks for all the help. I went home and took a wire brush to the crank pulley and I did find that it had 2 timing marks and guess what I was using the wrong one to set the rotor cap to the #1 tower on the dist. cap Then I finaly realized you could losing the 2 bolts at rotate the dist like a regular car one instead of un-bolting it from the block and adjusting the dist gear to the cam gear what a dummy. Once I had the right timing mark everything lined up great rotor pointed to the #1 tower perfect then I losened the dist and static timed it like the book says and I hit the key and it fired right up and ran 100% better. The next day I did a complete carb rebuild new jets and the works. It ran better with that but still could not get it completly smooth at high rpms. I then did the fuel level check on the carb and found out I adjusted the float wrong I have 1/2" to much fuel in the float bowl causing it to run super rich and I hope once I get it set right that the engine will smooth out and I can get the correct adjustments out of the high idle screw. thanks for all the help guys and I learned a few things and it was great! Chad Penny
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|