Farmall & IHC Tractors Discussion Board |
Re: Repairing a cub
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gene on November 03, 2004 at 12:03:39 from (208.144.172.167):
In Reply to: Repairing a cub posted by 1951G on November 03, 2004 at 10:43:52:
A new Cub radiator costs around $130.00. Welding the gas tank. Can be done. Remove the tank from the tractor. Rinse out with water - rinse until all traces of fuel are removed. Let the tank air dry with the sediment bowl and cap off for several days. You want to remove all of the fuel fumes. Vacuum cleaner on exhaust for several hours will speed up the drying out process. I used to teach metal shop and we (students) have welded up many gas tanks. Form a patch larger than the repair hole yet smaller then the filler opening. Put a small hole in the center of the patch. Stick a long piece of wire through the small hole in the patch, crimp the wire below the patch. Fish the wire through the filler hole and back up through the hole to be repaired. Pull the patch tight to the hole. Braze or wire weld the patch to the hole.
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|