Farmall & IHC Tractors Discussion Board |
What have I got? (IH 240)
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave D on October 01, 2004 at 19:33:51 from (4.233.170.244):
Whoa! Up here in New Hampshire I bought what I thought was a 1961 IH 240 Utility with a Husco loader off an exterior pump in front of the grill. Least that's what the Operator's Manual suggests along with what the seller told me. Problem is I can't match up anything that looks like the s/n with the International Model I-240 sn's in this website! Looks like the range for 1958-1962 IH 240s spreads from s/n 501 to 10727. Well, from the left side of the transmission housing, rear of the split, I can read the following number cast in relief: "369018 R1". In back of the shifter, on a top surface half under the seat this number is cast in relief: "369017 R1" which is one digit off. There is another number stamped into the L brake drum housing but there is a lot of flaking metal and paint and I can't quite make out the numbers/letters without a wirebrush. There is also some other number on the R side of the clutch housing, almost looks like it could be on a riveted plate but there are so many layers of yellow paint on the thing it looks like somebody laid it on with a trowel. Maybe I should also point out that the paint colors change dramatically right at the split, both yellow but one looking 'real' and the other washed out. Makes me wonder if I got the front end from one unit and the back end off another? Anyway I am trying to buy some gaskets for the axle housing etc and am getting kinda curious as to what I actually have here. Would appreciate any expert opinions or informed guesses! Thanks in advance.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|