Farmall & IHC Tractors Discussion Board |
Re: Lee and others
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by lee on September 10, 2004 at 09:27:39 from (24.24.95.246):
In Reply to: Re: Lee and others posted by lee on September 10, 2004 at 09:04:29:
In your previous post you asked how to check the bearing. If there is any sign of radial play the bearing should be replaced. If there is any sign of wear out of the ordinary running on the balls or the races it should be replaced. If there is any damage to the ball retainers it should be replaced. It must rotate free and not catch. Often times bearing races and balls get pitted due to corrosion from moisture in the lube. If they are pitted, replace them. It is really a visual check, all you can do. Use a strong magnifying glass. Often times I also factor in the difficulty level for future replacement as well as how much money I currently have and my end use. In the end there is always some anxiety in putting a used part back in. If it looks good and you still feel anxious about it, and you have the money, replace it. As with all things, opinions will vary as your mileage may also.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|