Farmall & IHC Tractors Discussion Board |
rotor cap rotation Farmall A
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Chad from MI on July 27, 2004 at 10:47:11 from (152.72.252.244):
Having trouble with my Farmall A with the H4 mag. It has been running bad after it warms up so I put another coil I had in it and new cap and rotor points and condensor. My first question is if standing at the seat platform looking at the dist. cap which way does the rotor cap rotate? I am assuming it rotates clockwise? if it doesn't maybe that is my problem. I have re timed it but do not always seem to get spark. at first I had none and I was conserened. so I took and made suret that I have good spark coming from the mag. But the spark doesn't seem to get from the dist cap to the plugs. has anyone else had this problem? I then pulled the rotor cap so it was not down tight and I got spark. This is a TSC rotor cap and points set. the dist cap is from IH. do you think there is a problem with the rotor cap from tsc where it isn't tall enough to hit the dist cap? Chad
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|