Farmall & IHC Tractors Discussion Board |
Distributor advance - '47 H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave in CT on July 05, 2004 at 10:33:14 from (204.60.63.216):
I'm trying to determine why I get no advance at higher RPMs on my '47 H. Back again with more information. The distributor is an HC5-757925 - from the flange that the clamps clamp onto (other numbers on the dist. housing are 353989R1 and 52 but I think that's for the housing part). Disassembled down to the cam. On the side of the cam that faces the dist. shaft plate there's a cylindrical post that fits into a hole in the dist plate. With the cam dropped down over the dist. shaft and this post in the hole, the cam can only rotate about three or four degrees. This appears to be the wiggle room of the post in the hole. I would expect the cam to be able to rotate 20 degrees, as it's being levered by the weights spinning out. Any ideas on what the problem might be? All the parts are free of rust so it looks like it should be in proper working order.
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|