Farmall & IHC Tractors Discussion Board |
Re: '36? IHC truck
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wardner on June 01, 2004 at 02:58:13 from (64.136.26.230):
In Reply to: '36? IHC truck posted by Out Back Dave on June 01, 2004 at 00:27:05:
According to CH Wendel who wrote 150 Years of IH, C-15 is a valid model #. The models are arranged in this order C-1 = 1/2 ton C-5 = 3/4 ton C-10 = 1 ton C-12 = 1 1/4 ton C-15 = 1 1/2 ton The largest trucks were C-60. That is probably a six ton truck and matched the largest screw drive Mack of the period which would have been 35,000 GVW. The biggest Macks were 100,000 GVW and had tandem chain drives. Ton and a half trucks usually had GVWs around 17,000 lbs. That should give you a payload around four/five tons. Top speed is probably around 45 mph. You probably have 20" rims. I am guessing that tire size is 6.00-20 or 6.50-20. Later ton and a halfs had 7.50-20 rubber. Can't help you with serial numbers/year. Ton and a half trucks were very popular into the '60s. One tons stole alot of their sales after that.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|