Farmall Tractors Discussion Board |
Re: Re: sleeve for M
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by jakee on October 25, 1999 at 20:10:08 from (152.163.213.61):
In Reply to: Re: sleeve for M posted by sammy the RED on October 25, 1999 at 17:17:51:
you need to pull the head first, some times between no.2 and 3 they crack behind the dry sleves, but you can bore out threw the hard wall and set a new sleve and then bore and set the dry sleve have done a few M,s like that, they do it to car motor,s all the time ,my thought,s are you may have lost a head gasket, or make sure your head stud,s are tite and if some are lose coat bottom side before you replace.
Follow Ups:
Post a Followup
|