Farmall Tractors Discussion Board |
Re: IH 424 BRAKES
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Farmer Bob on October 25, 1999 at 19:27:10 from (207.227.237.86):
In Reply to: IH 424 BRAKES posted by Buck on October 25, 1999 at 18:10:01:
Buck, Considering these are purely mechanical disc brakes, they will take more pressure than any hydraulic assisted disc brake system ie; your truck or car. It sounds like you did everything right in your brake overhaul...make sure your pedal freeplay is set by the manual. Some folks elect to lubricate the balls, I don't because they will attract brake dust and gum up if you lubed them after a period of use. One other thing to check is the scissor looking assembly where it bolts onto the actuator plates (with the balls inside) and the adjustment bolt that sticks out through the drum. Make sure thats not rusted up or corroded. Good luck. FB
Follow Ups:
Post a Followup
|