Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Re: Re: International 606 hydr
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe Evans on April 22, 2004 at 11:22:30 from (209.41.233.220):
In Reply to: Re: Re: Re: Re: Re: Re: International 606 hydrolic posted by Kris on April 22, 2004 at 09:30:57:
The hydraulic oil reservoir is the same as the transmission/rear end reservoir. These provide for a common oil sump, and the typical Hy-Tran hydraulic fluid serves to lube the transmission gears and final drives as well as providing oil for the hydraulic and power steering systems. Leaking Hy-Tran or universal tractor hydraulic fluid will not be black in color. This sounds like leaking engine oil. The reservoir is accessed through a plate located on the operator's platform right next to the gearshift. This plate has 3 bolts. Not one of IH's better ideas in my opinion. Oil level is checked by way of 1/4" cap screw located on the left side of the transmission case about 10" aft of the hydraulic/power steering pump mounting plate. Fill the reservoir until oil runs out this cap screw hole. Overfilling a little will not harm anything. I am assuming the 606 is similar enough to a 460 so that these direction aren't a bunch of baloney.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|