Farmall & IHC Tractors Discussion Board |
Re: Re: Speaking of Exhaust Lifts
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RZ(Wa) on March 23, 2004 at 13:36:58 from (12.144.139.75):
In Reply to: Re: Speaking of Exhaust Lifts posted by Farmallkid on March 23, 2004 at 11:07:54:
It is similar to a one-way hydraulic cylinder in operation. Instead of using oil to move the ram, exhaust from the engine is used to fill the expansion chamber and move the ram outward, and in turn move or raise the attached implement. There is a manually operated butterfly valve between the exhaust manifold and the collection tube to the muffler that redirects the exhaust into the lift mechanism. Sort of a Rube Goldberg arrangement, picture the way a syringe operates only in reverse, as fluid is forced into the needle end, the plunger will come out of the syringe due to icreased pressure. I don't think it would raise a fully loaded bucket or anything near that, but for resetting a cultivator, tiller or plow at the end of each crop row, it would sure beat using the same arm each time regardless of how the lift springs or counterbalance is set.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|