Farmall & IHC Tractors Discussion Board |
Re: 660 diesel servicing
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wardner on March 03, 2004 at 14:15:20 from (206.216.160.245):
In Reply to: 660 diesel servicing posted by Mark in AB on March 02, 2004 at 20:58:07:
Surprised nobody answered. I have a 660D. The hydraulic/gear oil filter is behind an oval plate on right side of tractor near middle. Plate is about 8-9" long. YOu may have to get the filter from IH. There are three drain plugs for this oil. One at rear and two in the center section. You fill from the level plug on left side of tractor. Or you can take off odd shaped plate next to gear shifter. Hytran is good. It is usually called "Tractor Fluid" at an auto parts place. YOu will need 15 gallons. Manuals are available at the left side of this page on the very top. IH has them also. The planetary hubs may need an oil change. I have never done mine and can't offer any advice.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|