Farmall & IHC Tractors Discussion Board |
Re: IH 354 clutch problems
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by lee on December 30, 2003 at 21:09:13 from (24.24.92.235):
In Reply to: IH 354 clutch problems posted by Ronofohio on December 30, 2003 at 11:11:55:
The 354 may be equipped with a single plate clutch, a heavy duty single plate clutch, or a dual clutch. If it's standard single plate or heavy duty single plate it's pretty straight forward with friction disk, pressure plate, 3 release fingers and coil springs. If it's the dual clutch it's got two friction disks, two pressure plates, 3 release fingers and two large belleville washers as spring members. A single broken finger will cause the problem you describe as will a damaged friction disk. Or maybe the clutch pedal lever has slipped on the release shaft. All the clutches have specs for height of release fingers off the flywheel face and for other things as well. The dual clutch has additional specs to set the pto release point. Be sure you get the right friction disk for the clutch you have. One time I replaced the engine clutch disk in a 354 and the guy sold me the wrong disk. It may have been a heavy duty disk, a little thicker than the right disk for that clutch. Needless to say, I did not notice the difference. It went together fine as for adjustments and such. I put the whole tractor back together only to find I could not release the pto clutch. The whole thing had to come back apart. A battle ensued with the parts supplier as he told me over the phone the disk was right and claimed I had screwed the clutch up. I took the clutch disk back and by the time I got there he had found the correct disk with a different part#.
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|