Farmall & IHC Tractors Discussion Board |
Re: Re: Re: IH 240 utility 3 point
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Billy McCarver on December 29, 2003 at 03:23:36 from (67.30.60.227):
In Reply to: Re: Re: IH 240 utility 3 point posted by Jim B. on June 22, 2003 at 14:24:58:
Hi, You might look into getting a parts manual from binder books. My 240u has a factory 3 pt hitch with many parts missing. Once you have the part numbers. You can search partout sites on the net and might also check with the Case web site for help locating. I've found that some parts like adj. lift links and stab bars for 9n from tractor supply will work. Measure hole distance first. You may have to go the 'fast hitch' route as they were more numerous and unique to IH. Main thing is to check that you have all the linkages required for the 3pt hitch as there is a vertical cylinder floating on linkages at the rear of the differental/trans housing plus linkages running from the cylinder mountings to the lift control under the seat and under the steering box. One set is for raise/lower (top i think) and the other is for draft or depth control under load (bottom ?). I believe that investing a few bucks in a set of manuals--owners, mechanic, and parts--will save a lot of bucks and heartburn/ache later. Mine helped me understand and maintain my tractor better. Best of luck with yours. Billy
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|