Farmall & IHC Tractors Discussion Board |
Re: Live Hyd and donor tractors
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by FarmallH42 on December 01, 2003 at 17:22:32 from (165.234.129.215):
In Reply to: Live Hyd and donor tractors posted by Paul G. on December 01, 2003 at 17:00:22:
H thru 350 will not work on an M - definite difference in size. I think the IH pumps were aluminum and M&W pumps were cast. Super M thru 450 pump will work. You will need pump, cam gear, and front cover and plate to make it fit. There was also a kit from M&W that drove where the distributor goes, if you found this pump you still need to change cam gears or risk breaking the gear. As for plumbing - do you want original or functional? My website has instructions for using the belly pump reservoir for live hydraulics on an H - I think it will work on an M belly pump as well, but not sure. You will have to take it apart to see where it would be safe to drill and tap holes. I would personally just order a 5 gallon steel tank to use as a reservoir and plumb it with a double spool valve - won't look original, but it will be functional.
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|