Farmall & IHC Tractors Discussion Board |
Re: Anyone put a PCV valve on a 706 or other tract
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on November 06, 2003 at 16:26:14 from (66.66.126.128):
In Reply to: Anyone put a PCV valve on a 706 or other tractor. posted by Adam on November 06, 2003 at 16:04:22:
Adam - I've never tried putting PCV on a tractor. I've thought about it myself and can see no reason why it would not work. Just size the PCV valve to match the displacement of the tractor engine. So if your 706 has a 291 cubic inch engine (?? - going from memory here….) recommend a PCV for a Chevy 300-6 truck or 305-V8 car. Connecting the PCV outlet to the manifold fitting above (downstream of) the carburetor is fine. Recognize you'll probably need to readjust both the idle and power screws on the carburetor as the addition of the PCV leans the mixture slightly. However if you're getting condensation in the engine and the engine is otherwise in good shape (no coolant leaks, etc) it means the engine is running too cold. In this situation even an effectively working PCV will not cure the condensation. Solutions: Install a hotter thermostat (180 or 192 deg). Use a winter front to cover the radiator in cool weather. Limit engine idling time - if it's gonna idle more than a couple minutes it's better to shut it down.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|