Farmall & IHC Tractors Discussion Board |
IH240-Two Questions
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Slowpoke on October 28, 2003 at 14:15:34 from (67.30.97.59):
1) Can someone please tell me the length of the dipstick measured from the tip to up under the cap and the distance from the tip to the "Add' line and the 'Full' line. Mine was removed after I paid for the tractor and before I hauled it home. 2) Is there a heavy gauge wire or a solid copper rod from the solenoid to the field coils on the starter? Someone used a 12ga stranded wire and it fried the insulation. There is a square, rubber lined opening for the wire/rod to pass thru between the case and the end plate. I don't know if it's the original starter. I tried using a short length of #4 battery cable, but it doesn't want to bend in that small a radius to meet the coil bar. Thanks for your help.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|