Need blowup drawing for Bolster H

Posted by George on September 13, 2003 at 04:47:56 from (206.230.105.248):

I had the steering (bolster shaft) crack and I lost my steering. When I disassembled it, the whole thing fell out and now I do not know where all the parts go. Besides the actual shaft, there is a bearing, some sort of tapered steel disk that goes above or below the bearing, and there is a thing about 2 inches diameter that looks like a tin can with the ends removed. That thing just fell out and I have no clue where it goes.

Can anyone please email me a scan of the parts blowup for this.

ALSO

I bought a used shaft from a guy who sells whole trators and used parts. The shaft is good, but the bearings are real bad. My old bearings also look sloppy. I'd like to replace the bearing with a NEW one. Does anyone know where I can buy this part? (quickly).

Thanks

George

Follow Ups:

• Re: Need blowup drawing for Bolster H Bob Mills 16:01:11 09/13/03 (0)
• Re: Need blowup drawing for Bolster H williaf 10:24:41 09/13/03 (2)
  • Re: Re: Need blowup drawing for Bolster H Wayne M Kittler 14:56:20 09/13/03 (0)
  • Re: Re: Need blowup drawing for Bolster H williamf That didn't wor 10:42:40 09/13/03 (0)
• Re: Need blowup drawing for Bolster H Dick 07:31:30 09/13/03 (0)
• Re: Need blowup drawing for Bolster H Bob in SE Nebraska 06:24:48 09/13/03 (0)
• Re: Need blowup drawing for Bolster H RayP(MI) 05:56:25 09/13/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Need blowup drawing for Bolster H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]