Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Two way hydraulic
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by steve on August 21, 2003 at 19:03:06 from (204.246.222.83):
In Reply to: Re: Re: Re: Two way hydraulic posted by Farm w/Junk on August 21, 2003 at 17:49:22:
you should be able to blow thru the ports and figure it out. routinely the "IN" and "OUT" will be on opposite sides of the valve. in the neutral center position, blow thru the ports and air sould go straight thru on one pair. ---the cylinder ports are normally just a couple inches apart and probably on the same side of the valve. pull the valve spool forward to the "raise" position. now blow thru the ports and the inlet will go to the "raise" and the outlet would be connected to the "lower" or drain side. next push the spool in to the "lower" position. now the two cylinder ports will be switched and the inlet will be connected to the "lower" port and the outlet will be connected to the other end of the cylinder which is now the drain. you can also look at a couple valves at the local farm store to get an idea. many valves have the ports numbered or lettered if you look close. it helps to number the ports, then make a drawing of which are connected when you are in neutral, raise, and lower positions.
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|