Farmall Tractors Discussion Board |
Re: PTO shaft diameter on an H
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Aaron on September 22, 1999 at 15:51:35 from (129.186.165.125):
In Reply to: PTO shaft diameter on an H posted by Pat on September 22, 1999 at 15:11:41:
You could try to find a smaller coupler for the mower and replace that section of the drivelne. Just take the U-joint apart and slap in the smaller coupler. Aaron
Follow Ups:
Post a Followup
|