Farmall & IHC Tractors Discussion Board |
Re: Farmall H Steering
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmall-Nut on June 07, 2003 at 22:58:54 from (216.24.70.121):
In Reply to: Farmall H Steering posted by Doug on June 07, 2003 at 16:01:47:
Worst case scenario is the worm and sector are worn out. If your sector has a full 360 gear it can be spun 180 and reused if its a 3/4 gear replace it. The worm is almost always the problem and a salvage yard is the best bet. If your allowed to walk around find the H with the least amount of wear on the clutch peddle, thats normally the worm you want. In the meantime take the air from one tire or the other on the tricycle to 15 lbs or so and the road gear won't wobble so much. Hope this helps!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|