Farmall & IHC Tractors Discussion Board |
Re: PTO problems!!! Please Help
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mike (MI) on June 03, 2003 at 07:46:47 from (63.171.93.42):
In Reply to: PTO problems!!! Please Help posted by Jon Schenk on June 02, 2003 at 16:03:09:
You don't have live pto. The clutch has to be pushed in. If it still grinds, make sure the tranny is in gear, and the tractor isn't moving. Then it will go in for sure without grinding. The transmission gears have to come to a complete stop for it to go in without grinding. If your tractor is in neutral and you push the clutch it, it will take a second or two for the gears to stop spinning - and if your clutch drags at all, they'll keep right on spinning. This is why if you put the tractor in gear, it assures nothing is turning so long as you're stopped. Good luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|