Farmall & IHC Tractors Discussion Board |
Re: ih 240-clutch replaced still grinding...
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by K-Mo on May 28, 2003 at 08:56:04 from (65.169.189.2):
In Reply to: ih 240-clutch replaced still grinding... posted by dean on May 28, 2003 at 04:49:38:
My 140 and 240 do the same thing. I just charged it off as the flywheel effect of the input shaft. On these tractors, the input shaft and gears are mostly above the oil level. On tractors like the Famall H, the input shaft drives the lower shaft which is submersed on oil. The input shaft on the 240 does drive the oil slinger gear which is submersed and maybe a heavier oil would help provide more drag. I just idle mine down before putting it in gear.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|