Farmall & IHC Tractors Discussion Board |
Re: IH 884 hydraulic oil foaming TA
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ih_bug on May 26, 2003 at 20:34:32 from (66.46.141.58):
In Reply to: IH 884 hydraulic oil foaming TA posted by Dick C on May 26, 2003 at 07:05:00:
if the TA is slipping in low that means that your sprag clutch is slipping and she will have to be split to fix it no oil pressure needed for low , either the plates are out in high (likely) or you have no oil pressure to lock up the clutch pack. does this tractor have a loader on it? if so where is the return line dumped? it is supposed to go in a plug behind the right rear tire in the bottom of the transmission not be dumped in the fill hole in the back . if dumped in the fill hole will cause foaming because of air mixed with oil.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|