Re: change the oil and now it won't run.350U

Posted by Ethan stuped me on April 08, 2003 at 14:08:18 from (206.216.207.201):

In Reply to: change the oil and now it won't run.350U posted by ethan on April 07, 2003 at 13:16:59:

Just put rings and bearings in it.I drained the oil one day last week ,while the oil was draining I started to work on the pto clutches .Been having problem with them slipping.So to make a long story short I got the wrong oil filter and when I got around to finishing the job forgot about tightening up the pto cluch.beleve it or not if you tighten up the pto to much it will slow the motor down .Went out to day and loosed it back up and it started right up.
Now one of the bolt on top of the pto housing is for the pto brake and the other is for tighten up the clutch bans which one does which.I am think the one closest to the tractor is the brake for this is the one I tighten up and the other is for the bans, Is this right.? thank for your help.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: change the oil and now it won't run.350U Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]