Farmall & IHC Tractors Discussion Board |
Re: TA noise
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jeff OH on April 02, 2003 at 05:58:48 from (198.30.81.2):
In Reply to: TA noise posted by CityFarmer on April 01, 2003 at 09:54:02:
I bought a 1066 a few years ago with the same noise you described. I only heard the noise at idle, around 1000 rpm and the noise would go away. The TA was weak on the low side so i figured a new TA will fix the problem. I ran it for 2 more years with no problems until the low quit working. At that time I put in a new TA and driven gear and needle bearing on the countershaft, the nut was not loose. Got it back together and still had the noise. Not as loud but I was disappointed, it was still there. That was 4 years ago and I'm still using it today with no problems. I put about a 100 hrs a year on it, some hard, most not. I chisel plow 80 acres a year. I'm not going to tear it apart to look for the noise unless it gets worse or someone can convince me that they know exactly what the problem is. I suspect the problem is with the spacers on the countershaft.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|