Farmall & IHC Tractors Discussion Board |
Re: Head repair??????
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by BlueLite on March 06, 2003 at 05:58:55 from (216.209.118.119):
In Reply to: Head repair?????? posted by Antique puller on March 04, 2003 at 16:04:54:
I have an old Popular Mechanic magazine book that fixed the problem simply with a drill and a tap set and a few screws. It said to find the end of the crack and drill at the end of these with the end of crack center of hole. Tap screws at these locations. This ends the stress on the block. Working in from these ends, drill a series of holes along the crack and tap in screws, (I might add for these days use some epoxy on the thread)until the length of the crack is filled with tapped screws. I know, not very practical, but we're talking post war advice. Anyway, that's interesting trivia. I've heard in similar cases you can also heat up the head evenly and weld it with nickle rod or grind a groove and braze it.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|