Farmall & IHC Tractors Discussion Board |
Re: 966 shifting fix
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Aces on March 03, 2003 at 16:08:22 from (205.187.80.166):
In Reply to: 966 shifting fix posted by Wade on March 03, 2003 at 11:55:02:
I thought some one would answered by now. But here goes it has been along time. But you can do the range trany by taking of the deck and the range cover and the left side plate to get at the reverse fork that plate is the longer one by the left brake with the 1/2" cap screws. You can get the cover with out the side plate off but better to put back on with side plate off. the speed tranny cover is the one I don,t remember as well. (I think you have to take the steering suports off to get the cover off). You can tell by the 3/8" screws because if I remember right they are 2 2-1/2" long and go down through the cover. There should be some rollers under the covers that brake some times. Hope I have helped. good lock.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|