Farmall & IHC Tractors Discussion Board |
Re: Re: 1948 super A hydraulic 2 inch soft plugs.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gary on February 16, 2003 at 19:25:10 from (152.163.195.181):
In Reply to: Re: 1948 super A hydraulic 2 inch soft plugs. posted by Hugh MacKay on February 13, 2003 at 16:27:22:
Hugh, yes it is similar to a frost plug on an engine block. It does not hold the hydraulic oil in the resevoir. It is located at 11:00, above the filling plug on both sides of the block. The 2-inch plug is direclty above the filter screen and is just above the rockshaft. It is probably the highest point on the block on both sides. I dk how long IH built them with these plugs. When I went to IH parts store, the newer models only have one plug located at the very top of the hydraulic block which is directly underneath the gas tank which you cannot see. But, in all the books etc. service people have looked at, there is no name or part numbers for these plugs. Don't know what else to tell you.........???
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|